Ducted Fume Hood, HUYAir FH

The Ducted Fume Hood, HUYAir FH used to control and treat pollutant emissions in industrial and chemical applications, particularly when working with strong acids and corrosive chemicals, to protect the health of workers.

The quality of the Toxic Fume Hood, HUYAir FH, meets the ASHRAE 110 standard.
Size standard: 1200mm | 1500mm | 1800mm.
Warranty: 3 years.

Technology:

The motor uses Quimipol fans from Spain, which are energy-efficient, extend the lifespan of the filters, and reduce noise during operation. The impeller and fan blades are made of PP plastic, resistant to chemical corrosion.
The cabinet is equipped with sensors to directly monitor the airflow rate and integrated with a low airflow alert mode.
Maximum suction velocity when the opening is at 500 mm: 0.51 m/s.

Design:

The cabinet is designed with upper air intake bypass slots on the front face, along with adjustable baffles to ensure good airflow circulation in both sealed and open-door conditions at higher positions.
The cabinet is designed with double walls to minimize air leakage while maintaining a high aesthetic appearance for the electrical and water systems.
The cabinet has a built-in 250 mm diameter exhaust duct, and if necessary, additional ducts can be installed to exhaust air to the external environment of the laboratory.

Materials:

The outer shell is made of 1.2 mm thick galvanized steel with chemical-resistant electrostatic powder coating.
The inner chamber is made of corrosion-resistant materials thick 0.8mm such as Polypropylene (PP)/Polyvinylidene difluoride (PVDF), capable of withstanding chemicals, including hydrofluoric acid, and high temperatures.
The door material is 5-10mm tempered glass, designed with counterweight to facilitate opening and closing.
The work surface material is available in options such as phenolic resin, PP plastic, or Epoxy Resin.

Model	HUYAir FH-1200	HUYAir FH-1500	HUYAir FH-1800
External dimensions (L x W x H mm)	R1200 x S900 x C1500 mm	R1500 x S900 x C1500 mm	R1800 x S900 x C1500 mm
Internal dimensions (L x W x H mm)	R1000 x S720 x C1200 mm	R1300 x S720 x C1200 mm	R1600 x S720 x C1200 mm
External dimensions with Support Stand (R X S X C mm)	R1200 x S900 x C2300 mm	R1500 x S900 x C2300 mm	R1800 x S900 x C2300 mm
Inflow air velocity	0,51 m/s
Brightness	>750 Lux
Noise level	<65 dB
Maximum door opening height	750 mm
Power supply	220 V/50 Hz

Support stand	Support Stand with caster wheels \| Height 800mm for model HUYAir FH
	Support Stand with cabinets \| Height 800mm for model HUYAir Bio2-Eco
Power accessories	Power outlet
Vans accessories	Gas vans \| Gas (such as N2) \| Vacuum vans
	Water vans
Sink accessories	Mini sink
Filter accessories	System Wet Scrubber \| Model : HUYAir WS

Không khí xung quanh được hút vào qua khe phía trước. Lưu lượng dòng khí hút vào 100% qua bộ lọc HEPA tạo thành dòng khí thẳng đứng đi lên và đi ra ngoài.
The cabinet is designed with upper air intake bypass slots on the front face, along with baffles to ensure good airflow circulation in both sealed-door and open-door conditions at higher positions. The surrounding air is drawn in through the front door, and the airflow is divided into two directions for intake and exhaust:

– Direction 1: Air from the outside is drawn up through the duct and expelled to the outside.
– Direction 2: Air is drawn through the slots, and the airflow behind the partition goes up through the duct for exhaust.